USB TYPE C 5V 2.4A Active PoE Splitter Power Over Ethernet 802.3af 100mbps

Description

(10/100Mbps Ethernet)Active PoE Splitter
5V 2.4A/12Watt
USB TYPE-C
PUTOUT
Compliant with IEEE802.3af/at
With 2.5KV isolation
Note:
The POE splitter must be connected to the POE switch, POE midspan or 48V~52V POE injector for proper operation.
The POE splitter is not suitable for PI 3B+,the one in the product picture is PI 4B.
Notice:
Some managed intelligent Gigabit PoE switches need to set the LAN port of this connected splitter
to Manual 100Mb/s mode in the management Settings of switches,
otherwise the power supply may work normally but the network connection will not work,
such as the following switch,
HP 3500-48G-PoE yl Switch (J8693A)
RJ45 female INPUT Port:
Support the IEEE 802.3af/at the Power over Ethernet PoE Switch
Support 48V Unsolicited Power Over Ethernet PoE Switch
Support 48V Unsolicited Power Over Ethernet PoE Adapter
Specification:
Compliant with IEEE802.3af/at
Isolation:2.5kV
Power Input:DC44~57V
Power Output:DC5V 2.4A
Data&Power INPUT Port:from RJ45 female (Compliant with IEEE802.3af/at PoE)
Data Output Port:RJ45 Male
Power Output Port:USB Type-C Power Plug
Data Transfer Rate:10/100Mbps
Data Pin: RJ45 pin 1236
Devices will be detected before poe input
Power Pin:support both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-)
Body size: 80 x 27x 22 mm
DC cable length:165mm
RJ45 Modular Plug cable length:155mm
Weight :55g
Operation Temperatue:-20℃ ~ 45℃
Storage Temperature:-30℃ ~ 70℃
Item Included:
10/100Mbps Active PoE Splitter(USB type-C Power Plug) x1