CO2 Cylinder Refill Adapter Bottle Connector with 24Inch Hose CGA320 US

Description

CGA320 CO2 Cylinder Tank Refill Adapter Hose Filling Station Set for Sodastream
Description
Specifications and parameters:
Material: Stainless steel and brass
Condition: 100% brand new, with pressure gauge，Has good air tightness, sturdiness, safety and reliability.
Hose length: 24 " (optional).
Working pressure: 0-2000 PSI.
Large carbon dioxide fuel tank thread: CGA320.
Instructions for use
1. Confirm that the on/off valve A and release valve C are closed(90 degrees to the ball valve body), and turn the pin knob B of the small cylinder adapter to the top (counterclockwise).
2.（ Put the gasket into the connector）Connect the connector (A end) to the large CO2 tank. (Tighten with a wrench. )
3. Connect the small cylinder  to the cylinder adapter (B end adapter).
4. Turn pin knob B down to touch cylinder pin slightly (clockwise)(if pressing the pin down too much, it will stop the gas enter by check valve when your filling cylinder of 6mm wide pin ）
5. Open the large Co2 tank valve.
6. Slowly open the on/off valve A (counterclockwise) and close it after 2-3 seconds, then open the release valve C release the residual gas in the small cylinder, and then remember to close the release valve C after this step ).
7. Carefully open the on/off valve A(20-30 degree Counterclockwise)to perform the charging process for 30-60 seconds, and then close the large carbon dioxide cylinder valve  (make sure the on/off A valve is open)
8. After filling, adjust the release knob B to the highest position and open the release valve C to release the residual gas in the hose.
9. After inflation, unscrew the small cylinder.
10. Repeat the filling process for each cylinder
Note:
1. If your big tank does not have a siphon, you should turn it over.
2. The cylinder should be empty. The pre-cooled cartridge will become very full.
3.  Check the bottle thimble before purchase. If the small bottle thimble is very thick, and it will be inflated difficulty, need replace thin thimble bottle.
4.Our adapter don't work RPV valve (residual pressure valve),please find picture as follow,but some of RPV valve can be removed by hex wrench,please check before ording. If your big tank has a RPV valve,you should order RPV valve pushing adapter from here.
Package includes
1 x 24 inch stainless steel braided hose refill station.
Features
1.We will put a red rubber round cap on the CGA320 nut to protect it from damage.
2.Before the charging process, please put the small cylinder in the refrigerator to cool down to ensure that the small cylinder can be filled with more carbon dioxide gas.
Payment
Shipping
Returns
Contact Us
[ Policy: And this area is the details contents of your policies. You can add a banner for this policy as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]
[ Shipping: This is the contents of your Shipping. You can add a banner for this Shipping as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]
[ Return: This is the contents of your Return. You can add a banner for this Return as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]
[ Contact Us: This is the contents of your Contact Us. You can add a banner for this Contact Us as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]
Specifications and parameters:
Material: Stainless steel and brass
Condition: 100% brand new, with pressure gauge，Has good air tightness, sturdiness, safety and reliability.
Hose length: 24 " (optional).
Working pressure: 0-2000 PSI.
Large carbon dioxide fuel tank thread: CGA320.