8 black Parking Sensors Buzzer Car Reverse Backup Rear Radar System Sound Alarm

Description

8 black Parking Sensors Buzzer Car Reverse Backup Rear Radar System Sound Alarm
Technical Specs:
Digital display for all cars LED 12V car reversing radar
There is a connection manual
Sensors You can DIY spray paint colors that match the colors of the car
Material; ABS plastic
Type; LED parking sensor
Model; PZ301
Applicable models All cars
Display type;
Power supply voltage; 12V (V)
Power; 2 (W)
Probe; 8 (s)
Alarm prompt;Beep
Detection range of 2.5 meters
Reminder type; digital band display
Working temperature; -30 ~ 80 (℃) (℃)
Screen size 3.5
Weight; 31 oz
Product parameters
Working voltage; 9DCV-15DCV
Rated voltage; 12DCV
Power consumption; maximum 0.5W
Test distance; 0.3 m -2.0 m
Alarm distance; 0 m -2.0 m
Display mode; two digital display distance, colorful light bar display direction
Display resolution; 0.1m
Probe diameter; 22mm
Probe installation method;
Probe direction; X, Y, 60 degrees
Working temperature; -30 degrees Celsius --- +80 degrees Celsius
Beep mode; bibi three heartbeat tone
Buzzer volume; 65dB
Sound frequency; 1.6-2.0m: 0.5HZ (slow); 1.1-1.5m: 1 HZ (slow); 0.6-1.0m: 3 HZ
(rapid); 0-0.4m:
Precautions
:
1. eight probe radar: reversing the back of the four probes work, when the brakes, thefirst four began to work.
2. Reversing: the car after the start of the four probes, and LED display appearsthree-color light and alarm sound (voice or beep).
3. reversing is completed, when the brakes, the probe before the start work ... ... (thatis: before and after the probe is not working at the same time)
Install the probe to prevent false positives
:
1. The mounting height of the probe is 50-55mm, if the installation is too low, easy todetect the ground, resulting in false positives
2. When installing the opening, the bumper will have a flash on the top, need to beamended, so that the probe is too tight and can not work. After drilling a good hole,use the knife to repair the hole around the hole, if there is burr, the hole is certainlytoo small, the probe is too tight will be false positives.
3. When installing the probe cable, be sure to tighten to prevent the rain into thewater, if the interface has water, will be false positives.
4. When installing the probe, press the probe's outer ring to the inside plug, try not topress the middle of the probe, the probe inside the fear of extrusion, so easy to causefalse positives.
product description
:
This reversing radar real voice newspaper, installation location personality selection
probe waterproof, anti-frost, anti-sand three anti-design, wide angle detection design
personality selection, weather resistance, anti-false alarm patent ranging technology.
Products supporting the probe is only general-purpose, connector on the Englishmark, only for easy installation
Package Incl
uded
:
Display x1
Host x1
Probe x8
Drill bit x1
Sticker x2
Manual x1
Box x1
Payment Policy:
We accept PayPal
only
Shipping Policy
Please contact us if you have special requirements (combination of packaging etc.).
Items will be shipped out within 1 business day after payment.
This items are stocked in USA. It will be sent by USPS or UPS. Generally it will arrive in 3-5 working days.
Return Policy
Within 60 days you get the item, if the item has a problem. Please contact us at first time and provide effective video or picture evidence to us.
After verification, if the problem is confirmed. We will do the refund or resend a New item to you.
All returned items MUST BE in the original package and you MUST PROVIDE the shipping Tracking Number to us.
Please contact us first, if return, exchange or refund is required. Any direct return of purchased items will not be processed.
Contact:
All emails will be answered within 1 business day